LNB (LNC) flange
Showing all 7 results
-
-
LNB (LNC), LNB (LNC) flange, All products
LNC Inverto PRO FL
- Input frequency range:
- Low bandwidth: 10.7 ~ 11.7 GHz
- High band: 11.7 ~ 12.75 GHz
- Output frequency range:
- Low bandwidth: 950 ~ 1950 MHz
- High band: 1100 ~ 2150 MHz
- OL frequency:
- Low band; 9.75 GHz
- High bandwidth: 10.6 GHz
- Own noise: 0.2 dB
- OL initial accuracy: +/- 1.0 MHz max.
- Phase noise (at 10 kHz): - 80 dBc / Hz Max.
- Conversion gain: 53 ~ 63 dB
- Variation gain: +/- 4 dB Max.
- Conversion point 1 dB (output): 0.0 dBm min.
- Control signal:
- Vertical: 10.0 ~ 14.0 V
- Horizontal: 16.0 ~ 20.0 V
- Band change: 22 KHz +/- 4 KHz
- 75 Ohm output impedance (connected to STB)
- Output connector: type-F (female)
- Current consumption: 110 mA max. @ 11 - 20V
- Operating temperature: -25 ~ + 60 ° C
- Weight: 130 g
SKU: L5916 -
LNB (LNC), LNB (LNC) flange, All products
LNC QUATTRO INVACOM FLANSA (Timbru verde 0,2 lei)
- LNC Quattro Universal Invacom QTF-031
- Input frequency: 10.7 - 12.75 GHz
- Output frequency: 950 - 2150 MHz
- Own noise: 0.3dB typical
- Castig: 50 - 60dB
- Interface: C120 flange, 18.5 O
- Ideal antenna: F / DN / A
SKU: L5906 -
-
LNB (LNC), LNB (LNC) flange, All products
LNC QUATTRO INVERTO FL WHITE (Timbru verde 0,2 lei)
- INVERTO IDLP-001QTF
- Input frequency: 1.7-11.7Ghz, 11.7-12.75 GHz
- LO: 9.75 - 10.6 GHz
- Polarization: Linear
- LNB Gain (typ.): 50 - 65 dB
- Gain Flatness: 0.75dB@36MHz max
- Pole. & Freq. Band Control: 13 / 18v 22KHz
- Phase Noise @ 1kHz - 50 dBc / Hz
- Phase Noise @ 10kHz - 75 dBc / Hz
- Phase Noise @ 100kHz - 95 dBc / Hz
- Rejection image -40 dBm
- Output connector 75 ohm - “F” female
- Operating temperature -30 to +60 C
- F / D of feed 0.6-0.7
- Typical Power Consumption ≤ 210 mA
SKU: L7778 -
LNB (LNC), LNB (LNC) flange, All products
LNC TWIN INVERTO PRO FL (Timbru verde 0,1 lei)
- Input frequency range:
- Low bandwidth: 10.7 ~ 11.7 GHz
- High band: 11.7 ~ 12.75 GHz
- Output frequency range:
- Low bandwidth: 950 ~ 1950 MHz
- High band: 1100 ~ 2150 MHz
- OL frequency:
- Low band; 9.75 GHz
- High bandwidth: 10.6 GHz
- Own noise: 0.2 dB
- OL initial accuracy: +/- 1.0 MHz max.
- Phase noise (at 10 kHz): - 80 dBc / Hz Max.
- Conversion gain: 55 dB Min.
- Variation gain: +/- 4 dB Max.
- Conversion point 1 dB (output): 0.0 dBm min.
- Control signal:
- Vertical: 10.0 ~ 14.0 V
- Horizontal: 16.0 ~ 20.0 V
- Band change: 22 KHz +/- 4 KHz
- 75 Ohm output impedance (connected to STB)
- Output connector: type-F (female)
- Current consumption: 120 mA max. @ 11 - 20V
- Operating temperature: -30 ~ + 60 ° C
- Weight: 180 g
SKU: L7842 -
LNB (LNC), LNB (LNC) flange, All products
QUAD INVERTO PRO 40MM LNB FLANGE
- INVERTO IDLB-QUDFO2-OOPRO-OPP
- Low Band Input Frequency Range 10.7 ~ 11.7 GHz
- Low Band Output Frequency Range 950 ~ 1950 MHz
- Low Band LO Frequency 9.75 GHz
- High Band Input Frequency Range 11.7 ~ 12.75 GHz
- High Band Output Frequency Range 1100 ~ 2150 MHz
- High Band LO Frequency 10.6 GHz
- Noise Figure 0.3 dB Typ. (0.7 dB Max.)
- LO Initial Accuracy +/- 1.0 MHz Max.
- LO Temperature Drift +/- 3.0 MHz Max.
- Phase Noise (@ 10 kHz) - 80 dBc / Hz Max.
- Conversion Gain 55 dB Min.
- Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
- Gain Variation (Over Full Band) +/- 4 dB Max.
- Image Rejection 40 dB Min.
- 1 dB Compression Point (@ Output) 0.0 dBm Min.
- Cross Polarization Isolation 22 dB Min.
- Control Signal Ca (Vertical Polarization) 10.0 ~ 14.0 V
- Control Signal Cb (Horizontal Polarization) 16.0 ~ 20.0 V
- Control Signal Cc (Band Switching) 22 +/- 4 kHz
- Output VSWR 2.5: 1
- In-Band Spurious - 60 dBm Max.
- Current Consumption 180 mA Max. @ 11 ~ 2 0V
- Operating Temperature - 30 ° C ~ + 60 ° C
- Output Impedance 75 Ω
- Output Connector F-Type (Female)
- Weight 243 g
SKU: L5894
