Optical equipment
Showing all 13 results
-
Optical equipment, Global Invacom, All products
OTX Invacom LNB offset optical kit
- INVACOM GLOBAL FIBER KIT IRS OTx 1310nm (optional on order 1550 nm)
- REPLACEMENT FOR TRADITIONAL FIBER LNB
- LNB FIBER REPLACEMENT KIT (925004),
- COMPLETE KIT - DELIVERED WITH: LNB, OTx and PSU 20V
- TWO BROADBAND ENTRIES FOR LNB
- AN INPUT FOR UHF
SKU: L7713 -
Optical equipment, All products, WISI
Other optical products Wisi
- Other products from the Wisi range can be brought on request. Do not hesitate to contact us by phone +40256 211 692 or by email at catv@peruvision.ro for the realization of CATV configurations you want.
- You can consult the Wisi catalog online at: http://www.wisi.de/online_katalog/english.php
SKU: n/a -
Optical equipment, Global Invacom, All products
Fiber optic cable
- Fiber optic cable with outer diameter 3mm, protected with steel sheath;
- Equipped with FC / PC terminal connectors at both ends;
- According to ITU-T G657A-LSZH;
- Available lengths: 200m / 100m / 75m / 50m / 40m / 30m / 20m / 15m
- The price can increase for lengths of: 10m / 3m / 1m;
- Suitable for indoor and outdoor use;
- Operating temperatures -40 ° C… + 60 ° C.
- The displayed price is for 1 linear meter.
SKU: n/a -
Optical equipment, Global Invacom, All products
INVACOM TWIN OPTICAL CONVERTER
- The GI FibreMDU Virtual twin, connects to a single fiber optic cable from a FibreMDU Optical LNB. This is done either through a network of passive optical splitters (PON) or directly from the LNB (with attenuation).
- Each Virtual Twin provides 2 universal feeds.
- Converts an optical signal from a Fiber Optic LNB to IF
- Supports up to 2 satellite STB tuners from a single fiber optic connection
- 'Plug & Play' technology
- Powered by the STB
SKU: n/a -
Optical equipment, Global Invacom, All products
GI - 16 WAY FIBER IRS GTU EXPANDER MK3
- The GTU Expander can increase the output from a Quatro GTU from 8 to 48 outputs (when using 3x 16 way expanders in cascade). Its unique design allows it to be connected directly to the Quatro GTU without using additional cables. Feature the capability of cascading three units and achieving a 50m drop.
- Expands Quatro GTU output from 8 to 48 points
- Unique design for direct attachment to Quatro GTU
- Cascade up to 3 expanders
- Expander and GTU Powered by single 20V PSU
- Small form factor
SKU: n/a -
Optical equipment, Global Invacom, All products
GI - 8 WAY FIBER IRS GTU EXPANDER MK3
- The GTU Expander can increase the output from a Quatro GTU from 8 to 24 outputs (when using 3x 8 way expanders in cascade). Its unique design allows it to be connected directly to the Quatro GTU without using additional cables. Feature the capability of cascading three units and achieving a 50m drop.
- Expands Quatro GTU output from 8 to 24 points
- Unique design for direct attachment to Quatro GTU
- Cascade up to 3 expanders
- Expander and GTU Powered by single 20V PSU
- Small form factor
SKU: n/a -
Optical equipment, Global Invacom, All products
GI FibreIRS GTU Quatro MK III
- The GI FibreIRS Quatro GTU Mk3 converts optical power to RF power (FM, DAB, DTT and 4 satellite bands).
- Key features:
- Optical to RF converter (Satellite and FM, DAB, DTT)
- Automatic Gain Control (AGC)
- Powered by Multiswitch or PSU (available separately)
- Frequency Morphing Technology (FMT) for Worldwide use
- The FibreIRS GTU converts optical power to RF power (4 satellite bands and FM, DAB, DTT). All units have built in AGC which allows a wide dynamic range of optical powers without affecting output power and quality. Two LED indicators allow the user to monitor the status of the unit.
- Quatro for use with a multiswitch as it has dedicated outputs for each of the satellite bands (Vertical Low, Horizontal Low, Vertical High, Horizontal High) and terrestrial.
- Can be powered via the satellite outputs and used with either the Optical LNB or the ODU32.
- Optional whit circular polarization (D000288-CP)
SKU: C100182 -
Optical equipment, Global Invacom, All products
GI-FibreIRS Quad GTU MKIII
- The FibreIRS GTU converts optical power to RF power (4 satellite bands and FM, DAB, DTT). All units have built in AGC which allows a wide dynamic range of optical powers without affecting output power and quality. Two LED indicators allow the user to monitor the status of the unit.
- Quad for use directly with a STB / faceplate.
- Can be powered via the satellite outputs and used with either the Optical LNB or the ODU32.
- Features
- Optical to RF converter (Satellite and FM, DAB, DTT)
- Quad and Quatro versions available
- Automatic Gain Control (AGC)
- Powered by STB or PSU
- Terrestrial signals overlaid onto each output (Quad only)
- Frequency Morphing Technology (FMT) for Worldwide use
- Optional whit circular polarization (D000187-CP)
SKU: n/a -
Optical equipment, Global Invacom, All products
LNB Optical with vertical offset polarization with source
Optical equipment, Global Invacom, All productsLNB Optical with vertical offset polarization with source
- ONLY ON ORDER!
- Optical LNB with circular polarization. It can signal 32 optical converters within a radius of 10 km.
- OTHER FEATURES:
- Input frequency: 10.7 - 12.75 GHz
- Output frequency: 950 - 5.45 GHz
- Laser modulated output: 1310nm
- Noise: Typical at 25 ° C 0.5dB
- Maximum & Minimum Gain: 72 - 62dB
- Connectors: Type F and FC / PC
- Phase Noise 1 KHz -55dBc / Hz 10KHz -80dBc / Hz 100KHz -100dBc / Hz 1MHz -110dBc / Hz
- 40mm feedhorn
- Source included
SKU: n/a -
Optical equipment, Global Invacom, All products
LNB Optic FiberMDU C120 Mark 1 flange
- (ON ORDER)
- The FiberMDU optical LNB converts the 4 universal satellite IF bands into a single optical output (using a laser built into the LNB). It can signal 32 optical converters within a radius of 10 km.
- Variant with C120 flange.
- OTHER FEATURES:
- Input frequency: 10.7 - 12.75 GHz
- Output frequency: 950 - 5.45 GHz
- Laser modulated output: 1310nm
- Noise: Typical at 25 ° C 0.5dB
- Maximum & Minimum Gain: 72 - 62dB
- Phase Noise 1 KHz -55dBc / Hz 10KHz -80dBc / Hz
- 100KHz -100dBc / Hz 1MHz -110dBc / Hz
- Connectors: Type F and FC / PC
- Power supply included
SKU: n/a -
Optical equipment, Global Invacom, All products
LNB Optic FibreMDU offset MK1 with source
- ON ORDER!
- The FiberMDU optical LNB converts the 4 universal satellite IF bands into a single optical output (using a laser built into the LNB). It can signal 32 optical converters within a radius of 10 km.
- OTHER FEATURES:
- Input frequency: 10.7 - 12.75 GHz
- Output frequency: 950 - 5.45 GHz
- Laser modulated output: 1310nm
- Noise: Typical at 25 ° C 0.5dB
- Maximum & Minimum Gain: 72 - 62dB
- Connectors: Type F and FC / PC
- Phase Noise 1 KHz -55dBc / Hz 10KHz -80dBc / Hz 100KHz -100dBc / Hz 1MHz -110dBc / Hz
- 40mm feedhorn
- Source included
SKU: n/a -
Other, Optical equipment, All products
Triax TVC 06 - Mini Quad Re-converter
- The TVC 06 is a mini optical-to-coax converter, which converts the frequency stacked optical signal provided from an Opto-LNB TOL or a TOU232-Kit (IRS 1) sidecar unit into four switched universal coax signals like a Quad LNB. The converters also provide a coax DTT / DAB / FM signal diplexed onto each output when it is inserted into the optical transmitter TOU 232 SA.
- Built in AGC which allows a wide dynamic range of the optical signals on Fiber input with
- less deviation of the RF output level and signal quality.
- Two LED indicators display operational status.
- Easy mounting via a wall baseplate.
- Power supply via RF outputs from SAT receivers
- Optional external power supply for continuous operation available.
- Optical budget for PON (max.) 19.0 (@TOL 32, TOU 232) - 22.0 (@TOL 64) dB
- Optical input power -12.0 to 0.0 @ TOL32, TOU232 / -13.5 to 0.0 @TOL 64 dBm
- Optical splitting in PON (max.) 32 (@TOL 32, TOU 232) - 64 (@TOL 64)
- CHARACTERISTICS
- AGC (Automatic Gain Control) 30 dB
- Output level SAT 75 dBµV
- Output level TER 65 dBµV
- Vertical High band (1.95 to 3.0 GHz) 1100… 2150 (> 14.5V 22KHz) MHz
- Vertical Low band (0.95 to 1.95 GHz) 950… 1950 (> 14.5V) MHz
- Wavelength 1310/1550 nm
- Horizontal High band (4.4 to 5.45 GHz) 1100… 2150 (> 15.5V 22KHz) MHz
- Horizontal Low band (3.4 to 4.4 GHz) 950… 1950 (> 15.5V) MHz
- FREQUENCY
- RF frequency range, horizontal polarities 3.4… 5.45 GHz
- RF frequency range, vertical polarities 0.95… 3.0 GHz
- TER frequency range DAB 174… 241 MHz
- TER frequency range DTT 470… 854 MHz
- TER frequency range FM 87… 108 MHz
- RETURN LOSS
- Return Loss 10 dB
- electricity
- Impedance 75 Ω
- OPERATIONAL
- DC Operating voltage 10… 20 VDC
- PSU / adapter Art number 307657 (TPS323-20Vdc / 1.2A)
- Temperature - operating -10… 60 ° C
- DC Current consumption 125 (225mA @ 10V) mA
- PSU / adapter INFO Optional
- CONNECTORS
- Optical Type Connector - FC / PC
- IN Optical connector - FC / PC
- F-female OUT connector (4xSAT + TER)
- Output connectors 4xF (4 x SAT + TER)
SKU: C1003009 -
Optical equipment, All products, WISI
WISI 10G PON Carrier SFP + pluggable
- This universal ITU-T XGS-PON or IEEE 10G EPON hot-pluggable SFP + Optical Transceiver provides a built-in 10G Ethernet-to-PON MAC bridge. It uses 10G CGS / EPON optics to enable 10G PON solutions at a fraction of the costs of fixed-format OLT chassis. This 10G OLT plugs into any commercially-available Ethernet port of any switch or networking equipment with SFP + sockets, enabling them to become part of any 10G PON network. The modularity and remote management capabilities of this SFP + OLT suits them ideally for virtualized PON solutions and Software Defined Network (SDN) implementations. This OLT enables service provider to quickly deploy high-bandwidth services in the most agile, elastic and scalable way. The space and power requirements are far less than any other OLT product on the market, including very high capacity deployments.
- Features:
- Hot-Pluggable SFP + footprint
- Supports symmetric rates: 9.95G / 9.95G (XGS), 10.3G / 10.3G (10G EPON)
- Supports 500 AllocIDs / T-CONTs (XGS)
- 1000 LLIDs (10G EPON)
- Compliant with ITU-T G.9807.1 and G.988 specifications (XGS-PON)
- Compliant with IEEE 802.3av, IEEE1904.1, and DPoE specifications (10G EPON)
- IEEE AES encryption on PON side
- Supports Phase / ToD transport: IEEE 1588v2 (XGS) IEEE 802.1as-to-IEEE 1588v2 (10G EPON)
- Supports Synchronous Ethernet
- Jumbo frames: 9.6KB (XGS)
- 12.5KB (10G EPON)
- 8M Byte of internal packet buffermemory with configurable priority queues
- Class N2 (XGS) / PR30 + (10G EPON) optical power budget: 1577nm cooled EML DFB laser, 1270nm APD / TIA burst receiver
- Integrated Digital Diagnostics and Monitoring (SFF-8472) over Two-Wire interface
- Digital Receive Signal StrengthIndicator (RSSI)
- Single fiber SC / UPC receptacle
- SFI local interface
- Enhanced jitter performance
- Commercial or Enhanced case temperature.
- Applications:
- PON OLT Connectivity for Ethernet switches
- Outside Plant PON access bridge connectivity
- Wireless Backhaul
- High ‐ Bandwidth business PON connectivity
- Port ‐ by ‐ port expansion of existing switches
- MDU ‐ located PON bridge
- High ‐ Density PON aggregation
- Data Center PON
SKU: n/a