EMP switches
Showing all 21 results
-
EMP switches, Switches, Taps, All products
EMP-Centauri switch 17 to 1
- S16 / 1PCP-W3
- 17inputs / outputs 1.1 and 1.2 switch equipped with the terrestrial band combiner. It is designed for switching between 9-16 LNBs. The control mode is configured using the built-in DIP switch, see the instruction manual for details.
- Frequency range:
- LNB input: 950-2150 MHz
- Terrestrial input: 5-862 MHz
- Output: 5-2150 MHz
- Control commands: DiSEqC 1.0, 1.1, 1.2
- Input losses:
- Village. on average 5dB
- Terrestrial on average 2dB
- Satellite input isolation: 25 dB min
- Current consumption:
- of the 80mA (18V) + LNB receiver
- Direct current: 400 mA max
- Dimensions: 17.2 x 20 x 6.9 cm
- Operating temperature: -30 ~ +70 ° C
SKU: 1834 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 17 to 12
- MS17 / 12PIU-6
- Switch 17 inputs / 12 outputs, is suitable for use for satellite signal distribution, including terrestrial, to 12 users.
- Specifications of MS17 / 12PIU-6
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive)
- 40-862 MHz (active)
- Outputs 5-2300 MHz (passive)
- 40-2300 MHz (active)
- Control DiSEqC commands
- Insertion Loss 950-2300 MHz 7 dB avg
- 5-862 MHz (passive) 30 dB avg
- 40-862 MHz (active) 6 dB avg
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level * Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level * Sat. 78 dBµV avg
- Terr. 80 dBµV avg (passive) 79 dBµV avg (active)
- Power Consumption From each receiver 75 mA (18 V)
- From an internal power supply 4.5 W (passive TERR) 6.5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 47.0 x 15.2 x 8.7 cm (power cord length 130 cm)
- Temperature range -30 ° C - +70 ° C
SKU: C1003076 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 17 to 16
- Switch 17 inputs / 16 outputs, is suitable for use for satellite signal distribution, plus a terrestrial input, to 16 users.
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive)
- 40-862 MHz (active)
- Outputs 5-2300 MHz (passive)
- 40-2300 MHz (active)
- Control DiSEqC commands
- Insertion Loss 950-2300 MHz 7 dB avg
- 5-862 MHz (passive) 30 dB avg
- 40-862 MHz (active) 6 dB avg
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level * Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level * Sat. 78 dBµV avg
- Terr. 80 dBµV avg (passive) 79 dBµV avg (active)
- Power Consumption From each receiver 75 mA (18 V)
- From an internal power supply 4.5 W (passive TERR) 6.5 W (active TERR) + LNB
- Temperature range -30 ° C - +70 ° C
SKU: C5857 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 17 to 26
- Switch 17 inputs / 26 outputs, is suitable for use for satellite signal distribution, plus a terrestrial input, to 26 users.
- Specifications of MS17 / 26PIU-6
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive)
- 40-862 MHz (active)
- Outputs 5-2300 MHz (passive)
- 40-2300 MHz (active)
- Control DiSEqC commands
- Insertion Loss 950-2300 MHz 7 dB avg
- 5-862 MHz (passive) 30 dB avg
- 40-862 MHz (active) 6 dB avg
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level * Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level * Sat. 78 dBµV avg
- Terr. 80 dBµV avg (passive) 79 dBµV avg (active)
- Power Consumption From each receiver 75 mA (18 V)
- From an internal power supply 4.5 W (passive TERR) 6.5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 47.0 x 15.2 x 8.7 cm (power cord length 130 cm)
- Temperature range -30 ° C - +70 ° C
SKU: C5848 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 5 to 12
- P.1PRODUCT DESCRIPTION: PRODUCT DESCRIPTION: 146-UP (MS5 / 12PIU-5)
- Independent distribution system with 5 inputs / 12 outputs. Provides 22 KHz for the upper bands, for use with QUAD LNcs as well.
- Specifications of P.146-UP (MS5 / 12PIU-5)
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control 10-14.5 / 15.5-20 V + 0/22 kHz
- Insertion Loss 950-2300 MHz 0 dB avg.
- 40-862 MHz (active) 7 dB gain
- 5-862 MHz (passive) 21 dB loss
- SAT Inputs Isolation 20 dB min.
- Maximum Input Level Sat. 90 dBµV
- Terr. 110 dBµV (passive) 85 dBµV (active)
- Power Consumption From each receiver 45 mA (18 V)
- From internal power supply 5 W (passive TERR) 9 W (active TERR)
- Dimensions (w, d, h [cm]) 34.5 x 15.2 x 8.7
- Temperature range -30 ° C - +70 ° C
SKU: C7803 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 5 to 16
- P.147-UP (MS5 / 16PIU-5)
- Independent distribution system with 5 inputs / 16 outputs. Provides 22 KHz for the upper bands, for use with QUAD LNcs as well.
- Specifications of P.147-UP (MS5 / 16PIU-5)
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control 10-14.5 / 15.5-20 V + 0/22 kHz
- Insertion Loss / Gain 950-2300 MHz 0 dB avg.
- 40-862 MHz (active) 6 dB gin
- 5-862 MHz (passive) 22 dB loss
- SAT Inputs Isolation 20 dB min.
- Maximum Input Level Sat. 90 dBµV
- Village. 110 dBµV (passive) 85 dBµV (active)
- Power Consumption From each receiver 45 mA (18 V)
- From internal power supply 5 W (passive TERR) 9 W (active TERR)
- Dimensions (w, d, h [cm]) 34.5 x 15.2 x 8.7
- Temperature range -30 ° C - +70 ° C
SKU: C5864 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 5 to 28
- MS5 / 28PIU-6
- Switch 5 inputs / 28 outputs, is suitable for use for satellite signal distribution plus a terrestrial input, to 28 users.
- Specifications of MS5 / 28PIU-6
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control 10-14.5 / 15.5-20 V + 0/22 kHz
- Insertion gain / loss 950-2300 MHz 4 dB avg
- 5-862 MHz (passive) 25 dB avg
- 40-862 MHz (active) 10 dB avg gain
- SAT Inputs Isolation 20 dB min
- Maximum Input Level Sat. 90 dBµV avg
- Terr. 100 dBµV avg (passive) 90 dBµV avg (active)
- Maximum Output Level Sat. 86 dBµV avg
- Terr. 75 dBµV avg (passive) 80 dBµV avg (active)
- Power Consumption From each receiver 50 mA (18V)
- From an internal power supply 3.5 W (passive TERR) 5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 34.7 x 15.2 x 8.7 cm (power cord length 130 cm)
- Temperature range –30 ° C - +70 ° C
SKU: C5843 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 5 to 4
- Independent distribution system with 5 inputs / 4 outputs. The equipment is compatible with LNB Quad.
- Specifications of P.142-UP (MS5 / 4PIU-4)
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control 10-14.5 / 15.5-20 V + 0/22 kHz
- Insertion Loss 950-2300 MHz 3 dB avg.
- 40-862 MHz (active) 2 dB
- 5-862 MHz (passive) 19 dB
- SAT Inputs Isolation 20 dB min.
- Maximum Input Level * Sat. 100 dBµV
- Terr. 110 dBµV (passive) 93 dBµV (active)
- Power Consumption From each receiver 40 mA (18 V)
- From internal power supply 4 W (passive TERR) 6 W (active TERR)
- Dimensions (w, d, h [cm]) 26.5 x 15.2 x 8.7
- Temperature range -30 ° C - +70 ° C
SKU: C7337 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 5 to 8
- P.143-UP (MS5 / 8PIU-4)
- Independent distribution system with 5 inputs / 8 outputs. Provides 22 KHz for the upper bands, for use with QUAD LNcs as well.
- Specifications of P.143-UP (MS5 / 8PIU-4)
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control 10-14.5 / 15.5-20 V + 0/22 kHz
- Insertion Loss 950-2300 MHz 4 dB avg.
- 40-862 MHz (active) 3 dB
- 5-862 MHz (passive) 20 dB
- SAT Inputs Isolation 20 dB min.
- Maximum Input Level * Sat. 100 dBµV
- Terr.110 dBµV (passive) 93 dBµV (active)
- Power Consumption From each receiver 40 mA (18 V)
- From internal power supply 4 W (passive TERR) 6 W (active TERR)
- Dimensions (w, d, h [cm]) 27.0 x 15.2 x 8.7
- Temperature range -30 ° C - +70 ° C
SKU: C4963 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 8 to 1
- 9in / 1out 1.1 & 1.2 switch for up to 8 satellite positions and 1 subscriber, equipped with combiner for terrestrial band. It is designed for switching between 5 to 8 LNBs.
- Village. inputs 950-2300 MHz
- Terr. input 5-862 MHz
- Output 5-2300 MHz
- DiSEqC 1.0, 1.1, 1.2 commands
- Insertion loss Sat. 5 dB avg Terr. 3 dB avg
- Village. insulation inputs 25 dB min
- Power consumption From receiver 60 mA (18 V) + LNB
- DC current pass 400 mA max
- Dimensions (w, d, h) 11.2 x 11.2 x 4.9 cm
- Temperature range -30 ~ +70 ° C
SKU: C7113 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 9 to 10
- MS9 / 10PIU-5
- 9-input / 10-output switch, suitable for use for signal distribution, including terrestrial, to 10 users.
- Specifications of MS9 / 10PIU-5
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control DiSEqC Commands or
- (10-14.5 / 15.5-20 V + 0/22 kHz + Tone Burst)
- Insertion Loss 950-2300 MHz 0 dB avg
- 5-862 MHz (passive) 24 dB avg
- 40-862 MHz (active) 2 dB avg gain
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level * Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level Sat. 85 dBµV avg
- Terr. 86 dBµV avg (passive) 87 dBµV avg (active)
- Power Consumption From each receiver 50 mA (18V)
- From an internal power supply 3 W (passive TERR) 5.5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 34.7 x 15.2 x 8.7 cm (power cord length 130 cm)
- Temperature range –30 ° C - +70 ° C
SKU: C1003078 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 9 to 12
- 9-input / 12-output switch, suitable for use for signal distribution, including terrestrial, to 12 users.
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
SKU: C5846 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 9 to 16
- MS9 / 16PIU-6
- 9-input / 16-output switch, suitable for use for signal distribution, including terrestrial, to 16 users.
- Specifications of MS9 / 16PIU-6
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control DiSEqC Commands or
- (10-14.5 / 15.5-20 V + 0/22 kHz + Tone Burst)
- Insertion Loss 950-2300 MHz 0 dB avg
- 5-862 MHz (passive) 26 dB avg
- 40-862 MHz (active) 0 dB avg gain
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level * Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level Sat. 85 dBµV avg
- Terr. 84 dBµV avg (passive) 85 dBµV avg (active)
- Power Consumption From each receiver 50 mA (18V)
- From an internal power supply 3 W (passive TERR) 5.5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 34.7 x 15.2 x 8.7 cm (power cord length 130 cm)
- Temperature range –30 ° C - +70 ° C
SKU: C5847 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 9 to 26
- MS9 / 26PIU-6
- 9-input / 26-output switch, suitable for use for distribution to 26 users.
- Specifications of MS9 / 26PIU-6
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control DiSEqC Commands or
- (10-14.5 / 15.5-20 V + 0/22 kHz + Tone Burst)
- Insertion Loss 950-2300 MHz 3 dB avg
- 5-862 MHz (passive) 28 dB avg
- 40-862 MHz (active) 7 dB avg
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level * Sat. 82 dBµV avg
- Terr. 82 dBµV avg (passive) 78 dBµV avg (active)
- Power Consumption From each receiver 50 mA (18 V)
- From an internal power supply 3 W (passive TERR) 5.5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 34.7 x 15.2 x 8.7cm (power cord length 130 cm)
- Temperature range –30 ° C - +70 ° C
SKU: C5839 -
EMP switches, Switches, Taps, All products
EMP-Centauri switch 9 to 8
- MS9 / 8PIU-5
- 9-input / 8-output switch, suitable for use for signal distribution, including terrestrial, to 8 users.
- Specifications of MS9 / 8PIU-5
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
- Control DiSEqC Commands or
- (10-14.5 / 15.5-20 V + 0/22 kHz + Tone Burst)
- Insertion Loss 950-2300 MHz 0 dB avg
- 5-862 MHz (passive) 24 dB avg
- 40-862 MHz (active) 2 dB avg gain
- SAT Inputs Isolation Between V / H Polarizations 20 dB min
- Between Low and High Bands 20 dB min
- Between Sat Systems A and B 25 dB min
- Maximum Input Level * Sat. 85 dBµV avg
- Terr. 110 dBµV avg (passive) 85 dBµV avg (active)
- Maximum Output Level Sat. 85 dBµV avg
- Terr. 86 dBµV avg (passive) 87 dBµV avg (active)
- Power Consumption From each receiver 50 mA (18V)
- From an internal power supply 3 W (passive TERR) 5.5 W (active TERR) + LNB
- Dimensions (w, d, h [cm]) 34.7 x 15.2 x 8.7 cm (power cord length 130 cm)
- Temperature range –30 ° C - +70 ° C
SKU: 002725 -
EMP switches, Switches, Taps, All products
Rogetech 2 to 1 switch
- Connecting 2 satellites to 1 receiver, no other power source is needed
- Compatible with single, twin and quad Lnbs
- Inputs: 2 x 950-2150 MHz
- Output: 1 x 950-2150 MHz
- Through loss: 3 dB
- Return loss:> 10 dB
- DiSEqC compatible: 1.0
- Isolation:> 20 dB
- Linearity: +/- 1 dB
- Control signal: position
- Remote supply voltages: 500 mA
- Operating temperature: -30… +60 ° C
- Water and UV resistant housing
SKU: C7283 -
EMP switches, Switches, Taps, All products
Rogetech switch 4 to 1
- Connecting 4 satellites to 1 receiver
- No other power source is needed
- Compatible with single, twin and quad Lnbs
- Inputs: 4 x 950-2150 MHz
- Output: 1 x 950-2150 MHz
- Through loss: 3 dB
- Return loss:> 10 dB
- DiSEqC compatible: 1.0
- Isolation:> 20 dB
- Linearity: +/- 1 dB
- Control signal: position
- Remote supply voltages: 500 mA
- Operating temperature: -30… +60 ° C
- Water and UV resistant housing
SKU: C7282 -
