Water-resistant 2-in-1 DiSEqC 2.0 switch in the housing for connecting 2 satellites to 1 receiver. The 2 inputs are controlled from the receiver.
More details here.
You may also like…
-
All products, Switches, Taps, EMP switches
EMP-Centauri switch 8 to 1
- 9in / 1out 1.1 & 1.2 switch for up to 8 satellite positions and 1 subscriber, equipped with combiner for terrestrial band. It is designed for switching between 5 to 8 LNBs.
- Village. inputs 950-2300 MHz
- Terr. input 5-862 MHz
- Output 5-2300 MHz
- DiSEqC 1.0, 1.1, 1.2 commands
- Insertion loss Sat. 5 dB avg Terr. 3 dB avg
- Village. insulation inputs 25 dB min
- Power consumption From receiver 60 mA (18 V) + LNB
- DC current pass 400 mA max
- Dimensions (w, d, h) 11.2 x 11.2 x 4.9 cm
- Temperature range -30 ~ +70 ° C
SKU: C7113 -
All products, Switches, Taps, EMP switches
EMP-Centauri switch 17 to 1
- S16 / 1PCP-W3
- 17inputs / outputs 1.1 and 1.2 switch equipped with the terrestrial band combiner. It is designed for switching between 9-16 LNBs. The control mode is configured using the built-in DIP switch, see the instruction manual for details.
- Frequency range:
- LNB input: 950-2150 MHz
- Terrestrial input: 5-862 MHz
- Output: 5-2150 MHz
- Control commands: DiSEqC 1.0, 1.1, 1.2
- Input losses:
- Village. on average 5dB
- Terrestrial on average 2dB
- Satellite input isolation: 25 dB min
- Current consumption:
- of the 80mA (18V) + LNB receiver
- Direct current: 400 mA max
- Dimensions: 17.2 x 20 x 6.9 cm
- Operating temperature: -30 ~ +70 ° C
SKU: 1834 -
All products, Switches, Taps, EMP switches
EMP-Centauri switch 9 to 12
- 9-input / 12-output switch, suitable for use for signal distribution, including terrestrial, to 12 users.
- Frequency Range LNB-Inputs 950-2300 MHz
- Terr. Input 5-862 MHz (passive) 40-862 MHz (active)
- Outputs 5-2300 MHz (passive) 40-2300 MHz (active)
SKU: C5846
