- PremiumX DiSEqC 1.3 PXM-S motor with steel gear.
- The Sat PremiumX DiSEqC 1.2 engine facilitates the movement of the antenna to different satellites up to a satellite antenna size of 120 cm. It is controlled by a receiver with Diseqc 1.2 or 1.3 without additional power supply and has 100 satellite positions. The steel gear and the stable structure of the engine ensure a longer life and stability.
- The power supply is provided by the receiver, which passes power through the coaxial cable and thus supplies power to the motor.
- Protocol: DiSEqC 1.2 and go to "X"
- Compatible receivers: Receiver with DiSEqC function 1.2
- Antenna size: Max 120cm
- Speed: 2.5 ° / sec (at 13V); 3.2 ° / sec (18V).
- Azimuth angle: 80 ° East ~ 80 ° West (160 °)
- Elevation: 25 ~ 75 °
- Input voltage: 13/18 V
- Output voltage: 13/18 V
- Power consumption: 100mA (standby) / 200mA (normal) / 350mA (max.)
- Satellite positions: 100 positions
- Calibration function: Yes, "GO TO X" (go to 0 °)
- East / West manual buttons: Yes, at the bottom
- Limitation protection: 1. Fixed by microswitch, 2. Programmable software limit, 3. Current limit
- Positioning sensor: High resolution Hall effect sensor
- Connection: F connection.
- Weight (engine): 3.1 kg (net) / 3.5 kg
- Dimensions (motor): 345 x 168 x 110mm
ACTUATOR H-H PREM.X 120CM (Timbru verde 1 leu)
Availability:
12 in stock
- PremiumX DiSEqC 1.3 PXM-S motor with steel gear.
- The Sat PremiumX DiSEqC 1.2 engine facilitates the movement of the antenna to different satellites up to a satellite antenna size of 120 cm. It is controlled by a receiver with Diseqc 1.2 or 1.3 without additional power supply and has 100 satellite positions. The steel gear and the stable structure of the engine ensure a longer life and stability.
- The power supply is provided by the receiver, which passes power through the coaxial cable and thus supplies power to the motor.
- Protocol: DiSEqC 1.2 and go to "X"
- Compatible receivers: Receiver with DiSEqC function 1.2
- Antenna size: Max 120cm
- Speed: 2.5 ° / sec (at 13V); 3.2 ° / sec (18V).
- Azimuth angle: 80 ° East ~ 80 ° West (160 °)
- Elevation: 25 ~ 75 °
- Input voltage: 13/18 V
- Output voltage: 13/18 V
- Power consumption: 100mA (standby) / 200mA (normal) / 350mA (max.)
- Satellite positions: 100 positions
- Calibration function: Yes, "GO TO X" (go to 0 °)
- East / West manual buttons: Yes, at the bottom
- Limitation protection: 1. Fixed by microswitch, 2. Programmable software limit, 3. Current limit
- Positioning sensor: High resolution Hall effect sensor
- Connection: F connection.
- Weight (engine): 3.1 kg (net) / 3.5 kg
- Dimensions (motor): 345 x 168 x 110mm
380.00 lei
12 in stock
| Weight | 3.30 kg |
|---|---|
| Dimensions | 34 × 17 × 11 cm |
| Producer | Others |
| Equipment type | Antenna motor max 1.20m |
You may also like…
-
All products, LNB (LNC), LNB (LNC) offset
LNC INVERTO SINGLE ESS OFFSET (Timbru verde 0,1 lei)
- Low band output frequency range 10.7 - 11.7GHz
- High bandwidth frequency range 11.7 - 12.75GHz
- Low band output frequency range 950 -1950MHz
- High bandwidth frequency range 1100 - 2150MHz
- OL frequency low band 9.75 GHz
- 10.6 GHz high band OL frequency
- OL deviation at temperature (﹫ - 35 ℃ ∽ + 60 ℃) ± 500kHz (Max.)
- OL phase noise ﹫ 10K Hz - 80 dBc / Hz (Max.)
- Gain Ripple ± 0.75dB / 27MHz
- Noise level 0.3dB (Typical) / 0.7dB (Max.)
- Conversion gain 52 - 62dB
- Gain variation ± 3dB
- 20dB cross polarity insulation (Min.)
- 40dB image rejection (Min.)
- Compression point 1 dB (O / P) 0dBm (Min.)
- Control signal Ca [V] 11.0 ~ 14.0 V
- Control signal Cb [H] 16.0 ~ 20.0 V
- Cc control signal [Band change] 22KHz ± 4kHz 0.4V - 0.8V pp
- Spurious level - 60dBm (Max.)
- Current consumption (DC) 80 mA (Max.) @ 11-20V
- Operating temperature -30 ℃ to + 60 ℃
- Output impedance (connected to STB) 75 Ω
- Mother F type output connector
- Weight 80 g
SKU: L7094 -
